Esterline CMA-9000 - Page 133

OPERATOR’S MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
CONDENSED ARRIVAL PROCESS
This page provides an overview of the process of selecting the arrival procedures. The intent of each step is
summarized on the next page.
1. MOD, ACT ROUTE - select departure/arrival index page.
2. DEP/ARR INDEX - select arrival at desired airport (origin or destination).
3. ARRIVALS - select STAR and STAR transition.
4. MOD, ACT LEGS - confirm the arrival procedure agrees with the clearance, then make the modified route
active.
A detailed description of each page appears in Appendix A.
STANDARD TERMINAL ARRIVAL ROUTE (STAR) SELECTION
This procedure is based on the STAR and STAR transition depicted in Figure 6-1 and assumes that only these
portions of the arrival are to be loaded at this time.
Display the DEP/ARR INDEX 1/1 page by pressing DEP/ARR.
1. Display the ARRIVALS 1/1 page for either the origin or destination airport by pressing the ARR prompt at
LSK 1R or 2R respectively.
1R
2R
3R
4R
5R
DEP/ARR INDEX 1/1
ACT RTE 1
<DEP KSEA ARR>
PANC ARR>
RTE 2
<DEP KSEA ARR>
PANC ARR>
1L
2L
3L
4L
5L
6L
6R
Page 6-2
August 17, 2010
DRAFT