OPERATOR’S MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page OR-1
August 17, 2010
PURPOSE OF OPERATOR'S MANUAL
This Operator's Manual applies only to CMA-9000 Flight Management Systems (FMS) which incorporate the
specific operational program(s) indicated on the cover page.
This manual describes the capabilities, components, typical flight applications, and operating procedures for the
CMA-9000 family of the Flight Management Systems (FMS).
THIS MANUAL IS INTENDED TO BE A GENERIC MANUAL FOR ALL FMS APPLICATIONS. THE
PROCEDURES DESCRIBED HEREIN INCLUDE ALL THE AVAILABLE DISPLAYS AND CONTROLS. When the
CMA-9000 FMS is set up through the configuration procedures, as described in the installation manual, some of
the features described herein may be disabled and not displayed.
CAUTION
THE INFORMATION CONTAINED IN NAVIGATION DATABASES IS NOT CERTIFIED BY A
REGULATORY AUTHORITY; THEREFORE, THE USER IS ULTIMATELY RESPONSIBLE FOR
ENSURING THAT DATA IS CORRECT PRIOR TO USE.
ALL FMSs ARE CERTIFIED FOR IFR NAVIGATION UNDER THE CONDITION THAT ANY
INFORMATION TAKEN FROM THE DATABASE BE VERIFIED AGAINST AN INDEPENDENT SOURCE
PRIOR TO USE. IT IS ESSENTIAL THAT PILOTS COMPLY WITH THIS REQUIREMENT BY USING
APPROACH, TERMINAL AND ENROUTE CHARTS TO CHECK FOR DISCREPANCIES IN FMS
GENERATED NAVIGATION DATA.
IF THERE ARE ANY DISCREPANCIES BETWEEN THE INFORMATION FROM THE FMS DATABASE
AND THE OFFICIAL PUBLISHED HARD COPY, THE PILOTS MUST FOLLOW THE HARD COPY
PROCEDURE, AND ADVISE THE FMS DATABASE SUPPLIER OF THE DISCREPANCY.
To Next Page
Loading...