OPERATOR’S MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page A-92
August 17, 2010
DECLIN [5L]: VHF NAV Aid station declination (VHF NAV only). The default value is boxes, and the
minimum/maximum values are W127/E127 degrees.
ELEVATION [5R]: Enter the elevation in feet (Airport and VHF NAV only). The default value is boxes, and the
minimum/maximum values are –9999/+9999 ft.
NAV DATA [6L]: Access to the NAV DATA 1/1 page.
(SAVE?): Displayed between the CANCEL/CONFIRM prompts upon modification of a user waypoint.
(DELETE?): Displayed between the CANCEL/CONFIRM prompts upon deletion of a user waypoint.
CANCEL [6L]: Cancels the definition, modifications or deletion of a user waypoint or performs a deletion of all user
waypoints as indicated by the question above the prompt.
NOTE: If one user waypoint was created, some new changes were made and cancelled, then all the latest
changes are lost.
DELETE ALL [6R]: Request to delete all user waypoints and triggers the CANCEL and CONFIRM prompts.
CONFIRM [6R]: Confirms the definition, modifications or deletion of a user waypoint or performs a deletion of all
user waypoints as indicated by the question.
NOTE: Changes are still allowed while CONFIRM is on the screen.
To Next Page
Loading...