Esterline CMA-9000 - Page 382

OPERATOR’S MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
C. The sub-mode in [1L] has been selected.
1R
2R
3R
4R
5R
6R
MO
D
CRZ SCHED 1/1
SPD SCHED
MIN FUEL
<ERASE CRUISE>
1L
2L
3L
4L
5L
6L
TITLE:
1. The title displays:
• “ACT” if cruise is active
• “MOD” if the EXEC key is illuminated
• Blanks if cruise is not active
followed by CRZ SCHED
XXX XXX [1L]:
Displays the first cruise speed sub-mode defined in the policy file. A selected sub-mode is displayed in large
font.
When the prompt is displayed, pressing the adjacent LSK has the following effect:
• The sub-mode's speed schedule is copied into the CRZ page data field at LSK 2L;
• The sub-mode's name is copied into the CRZ page title field at LSK 2L with "SPD" appended to the end of
the name if it is less than 6 characters in length. An abbreviated sub-mode name is provided in all other
cases (e.g. MIN FUEL will be displayed as MFUEL SPD);
• Selection of a CRZ speed sub-mode is propagated to the DES page if the selected sub-mode is applicable
for that page.
The font will change from large to small when another cruise speed sub-mode is selected or a manual speed
entry is made in LSK 2L on the CRZ page.
NOTE(S):
• The field title (e.g. “MIN FUEL”) is defined in the policy file.
• Selection of the sub-mode cancels CP-Speed Intervention if previously active.
• Selection of the sub-mode cancels the RTA if previously active.
• Selection of the sub-mode terminates an active speed constraint if previously active.
ERASE [6L]:
“ERASE” is only displayed when an active flight plan modification is in progress. Pressing this key will undo all
changes to the active flight plan and return to the ACT Route status.
CRUISE [6R]:
Enables direct access to the VNAV CRZ page.
Page RRJ-A-19
August 17, 2010
DRAFT