OPERATOR’S MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page RRJ-A-66
August 17, 2010
GREEN DOT [1L]: The name of the default engine-out sub-mode (e.g.: "GREEN DOT") is displayed in this field.
This engine-out sub-mode automatically becomes the active sub-mode upon entry into Engine-Out mode.
When the prompt is displayed, pressing the adjacent LSK has the following effects:
• The sub-mode's speed schedule is copied into the E/O CRZ/DD page data field at LSK 2L;
• The sub-mode's name is copied as-is into the E/O CRZ/DD page title field at LSK 2L and appended with
'SPD' when applicable;
• The selected sub-mode is displayed in large white font and the selection caret is removed.
NOTE: 'SPD' is only appended to the sub-mode name if this name is less than 6 characters.
LRC: The name of the second engine-out sub-mode (i.e. "LRC") is displayed in this field. This engine-out sub-
mode can only become the active sub-mode if manually selected.
When the prompt is displayed, pressing the adjacent LSK has the following effect:
• The sub-mode's speed schedule is copied into the E/O CRZ/DD page data field at LSK 2L;
• The sub-mode's name is copied as-is into the E/O CRZ/DD page title field at LSK 2L and appended with
'SPD' when applicable;
• The selected sub-mode is displayed in large white font and the selection caret is removed.
NOTE: SPD' is only appended to the sub-mode name if this name is less than 6 characters.
ERASE: "ERASE" is only displayed when an active flight plan modification is in progress. Pressing this key will
undo all changes to the active flight plan and return to the ACT Route status.
E/O CRZ [6R]:
E/O DD [6R]: Enables direct access to VNAV E/O CRZ or E/O DD page.
To Next Page
Loading...