OPERATOR’S MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
1
2. Press the E/O D/D prompt LSK [6R] to confirm the change.
Set the FGCP-selected
The airplane initiates the en wn to the engine out LRC ceiling.
The VNAV page title automatically changes to E/O DD.
• The CRZ ALT is automatically updated to the FGCP-selected altitude.
• The FMS commands LRC speed.
NOTE: Trip predictions are based on the assumption that the crew will command a Drift Down to the
CRZ ALT at IDLE thrust.
MOD E/O SCHED 1/1
SPD SCHED
}GREEN DOT
LRC
{ERASE
E/O DD}
. On the E/O SCHED page, press LRC SPD prompt [2L] .
The line title toggles to LRC SPD.
altitude to the engine out LRC ceiling altitude
gine out drift down at LRC speed do
ACT E/O DD 2/5
CRZ ALT G-DOT CEILING
FL350 FL239
LRC SPD LRC CEILING
260 FL195
DRIFT DOWN
00+02.3/ 10nm
DD FUEL
{CANCEL E/O
23kg
{SCHED
PROFILE}
Page F-32
August 17, 2010
To Next Page
Loading...