Fujitsu Eternus DX80 S2 - Release Global-Spare

Chapter 3 Configuration Settings and Display
3.3 RAID Group Management > release global-spare
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
125
release global-spare
This command releases Global Hot Spare(s). The disk will then have an unassigned (present) status.
■ Syntax
■ Syntax
■ Example(s)
release global-spare -disks disks
-disks This parameter specifies the disks to be released from the Global Hot Spare. One or more disks
can be specified. For details, refer to "1.2.3 Disk Syntax" (page 19)
.
The following example releases disk #011 from the Global Hot Spares:
CLI> release global-spare -disks 011
The following example releases disks #101 to #105 from the Global Hot Spares:
CLI> release global-spare -disks 101-105