Fujitsu Eternus DX80 S2 - Deleting RAID Groups; Deleting Registered Hosts; Deleting Volumes

Appendix D Basic Setting Examples
D.3 Setting Cancellation
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
749
D.3.6 Deleting Registered Hosts
An example of deleting registered hosts is shown below. For more details, refer to "3.5 Host Interface
Management" (page 193).
Procedure
1 Delete hosts HBA1, HBA2, and HBA4.
End of procedure
D.3.7 Deleting Volumes
An example of deleting volumes is shown below. For more details, refer to "3.4 Volume Management" (page
144).
Procedure
1 Delete volumes v0, v1, and v2.
End of procedure
D.3.8 Deleting RAID Groups
An example of deleting a RAID group is shown below. For more details, refer to "3.3 RAID Group Management"
(page 111).
Procedure
1 Delete the RAID group named r1.
End of procedure
CLI> delete host-wwn-name -host-name HBA1,HBA2,HBA4
CLI> delete volume -volume-name v0,v1,v2
CLI> delete raid-group -rg-name r1