Fujitsu Eternus DX80 S2 - Release Eco-Raid-Group

To Next Page

To Previous Page

Chapter 3 Configuration Settings and Display

3.3 RAID Group Management > release eco-raid-group

ETERNUS CLI User’s Guide

142

release eco-raid-group

This command releases the ECO schedule that is associated with a specific RAID group(s).

■ Syntax

■ Parameter

■ Example(s)

release eco-raid-group {-rg-number

rg_numbers

| -rg-name

rg_names

}

-rg-number

-rg-name

This parameter specifies a RAID group identifiers. One or more parameters can be specified.

For details, refer to "1.2.8 RAID Group Syntax" (page 22)

The following example releases an ECO schedule associated with the RAID group named "RGP001":

CLI> release eco-raid-group -rg-name RGP001

The following example releases an ECO schedule associated with RAID groups #1 – #10 at the same time:

CLI> release eco-raid-group -rg-number 1-10

Other manuals for Fujitsu Eternus DX80 S2