Chapter 3 Configuration Settings and Display
3.4 Volume Management > show migration
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
168
show migration
This command displays a list of the migrating volumes that are undergoing migration.
This command is also used for RAID Migration in which the destination is a Flexible Tier Pool (FTRP).
■ Syntax
■ Parameter
No parameters.
■ Output
■ Example(s)
show migration
# Migration Source Volume Migration Progress Error Work Volume
# No. Name Status Code No.
# 7
vol0007 Active 50% 0x05 6
A B C D E F
A: The move source volume number
B: The move source volume name
C: The volume migration status
D: The volume migration progress
E: The volume migration error code
F: Working volume number (In order to be used as a move destination)
The following example displays a list of all migrating volumes:
CLI> show migration
Migration Source Volume Migration Progress Error Work Volume
No. Name Status Code No.
- - Reserve - - -
1 Volume-Number#01 Error 20% 0x16 5
2 Volume-Number#02 Suspend 10% 0x1c 6
3 Volume-Number#03 Active 90% 0x00 4
To Next Page
Loading...
