Fujitsu Eternus DX80 S2 - LUN Groups

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
260
3.5.4 LUN Groups
This section explains the commands used for LUN group control. A LUN group is a definition of the association
between LUNs as seen from the host and volumes. LUN groups are only valid when the Host Affinity Mode is
enabled.
The definition of LUN groups is the same as affinity groups, except that the name is different.