Chapter 4 Function/System Settings and Display
4.1 User Management > show login-users
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
366
show login-users
This command displays the login users.
Users who are logged in to GUI or to the master CM to which the command is executed from CLI or software
are displayed. Users who are logged in to the slave CM from CLI or software are not displayed.
■ Syntax
■ Parameter
No parameters.
■ Output
■ Example(s)
show login-users
# Interface Session ID User Name User Role Login Date Lock IP Address
GUI
65535 f.ce Maintainer 2012-07-02 10:12:05 No 2001:db8::1234:0:0:9abc
A B C D E F G
A: User interface type
B: User session ID
C: User account name
D: Role name
E: Login date and time
F: Resource lock
G: IP address of logged in users
The following example displays the information of the users who are logged in:
CLI> show login-users
Interface Session ID User Name User Role Login Date Lock IP Address
GUI 65535 f.ce Maintainer 2012-07-02 10:12:05 No 2001:db8::1234:0:0:9abc
GUI 5 root Admin 2012-07-02 10:13:05 No 2002:C0A8:2101::1
CLI * 6 anonymous Monitor 2012-07-02 10:14:05 No 192.168.0.2
CLI 10 root Admin 2012-07-02 11:12:05 No fe80::20a:e4ff:fe9b:f50f
SOFT 112 esf_user Software 2012-07-02 12:12:07 Yes 192.168.0.1
To Next Page
Loading...
