Fujitsu Eternus DX80 S2 - Show Encryption

Chapter 4 Function/System Settings and Display
4.4 Miscellaneous > show encryption
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
566
show encryption
This command displays the status of the encryption mode.
■ Syntax
■ Parameter
No parameters.
■ Output
■ Example(s)
Encryption-related functions may not be available for some user environments.
show encryption
# Encryption Mode [Fujitsu]
A
A: Encryption mode
The following example displays whether the encryption mode is enabled or disabled:
CLI> show encryption
Encryption Mode [Fujitsu]
CLI> show encryption
Encryption Mode [AES]
CLI> show encryption
Encryption Mode [Disable]