Chapter 3 Configuration Settings and Display
3.4 Volume Management
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
175
3.4.2 Flexible Tier Volumes
This section explains the details of the commands that are related to the management of volumes that is
used by the Flexible Tier function.
In the same way as normal volumes, use the "show volumes" command to display a list of the Flexible Tier
Volumes and the "show volume-progress" command to display the formatting progress of Flexible Tier
Volumes.
In the same way as RAID Migration, use the "stop migration" command to stop Flexible Tier Migration and the
"show migrations" command to display a list of the migrating volumes for Flexible Tier Migration.
Functions to control Flexible Tier Volumes are as follows:
• Creating volumes
• Deleting volumes
• Changing an existing volume information
• Formatting volumes
• Expanding volumes
• Flexible Tier migration (migrating volumes)
The commands that are used for normal volumes and FTVs are shown below.
Function
Command used for normal
volumes
Command used for FTVs
Creating volumes create volume create flexible-tier-volume
Changing volume settings set volume set flexible-tier-volume
Formatting volumes format volume format flexible-tier-volume
Expanding volumes expand volume expand flexible-tier-volume
Expanding volumes show volumes
Displaying the progress of volume
processes
show volume-progress
Deleting volumes
delete volume delete flexible-tier-volume
delete all-flexible-tier-volume
Starting RAID Migration start migration start flexible-tier-migration
Stopping RAID Migration stop migration
Displaying a list of volumes undergoing
RAID Migration
show migrations
To Next Page
Loading...
