Fujitsu Eternus DX80 S2 - Stop Balancing-Thin-Pro-Volume

To Next Page

To Previous Page

Chapter 3 Configuration Settings and Display

3.4 Volume Management > stop balancing-thin-pro-volume

ETERNUS CLI User’s Guide

170

stop balancing-thin-pro-volume

This command stops evenly relocating the TPVs among RAID groups. Specify the TPV that is being balanced.

■ Syntax

■ Parameter

■ Example(s)

stop balancing-thin-pro-volume {-volume-number

volume_numbers

| -volume-name

volume_names

}

-volume-number

-volume-name

This parameter specifies the TPV to stop balancing. One or more parameters can be specified at

the same time. For details, refer to "1.2.9 Volume Syntax" (page 22)

The following example stops balancing TPV01 and TPV02:

CLI> stop balancing-thin-pro-volume -volume-name TPV01,TPV02

Other manuals for Fujitsu Eternus DX80 S2