Fujitsu Eternus DX80 S2 - Show Snap-Data-Volume

Chapter 4 Function/System Settings and Display
4.2 Advanced Copy Management > show snap-data-volume
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
395
show snap-data-volume
This command displays all the registered Snap Data Volumes (SDV). The SDVs that are displayed can also be
narrowed down by using the option parameter. The display includes the logical size, the physical size, the
used size, and various other items.
■ Syntax
■ Parameter
■ Output
■ Example(s)
show snap-data-volume [-volume-number volume_numbers | -volume-name volume_names ]
-volume-number
or
-volume-name
Optional. This parameter specifies the Snap Data Volume (SDV) identifiers that are to be
displayed. One or more SDVs can be specified at the same time. If this parameter is omitted, all
the SDVs are displayed. For details, refer to "1.2.9 Volume Syntax" (page 22)
.
# Volume Status Size(MB) Logical Physical Host Used Copy Used Host SDP Copy SDP
# No. Name Size(MB) Size(MB) Size(MB) Size(MB) Using Size(MB) Using Size(MB)
# 100 SDV001 Available 102400 5120 4144 3120 1024 3120 1024
A B C D E F G H I J
A: Snap data volume number
B: Snap data volume name
C: Volume status
D: Volume size(unit: MB)
E: Logical size of SDV (unit: MB)
F: Physical size of SDV (unit: MB)
G: Host Used size (unit: MB)
H: Copy Used size (unit: MB)
I: Host Using size of snap data pool (SDP) area (unit: MB)
J: Copy Using size of snap data pool (SDP) area (unit: MB)
The following example displays all the registered SDVs:
CLI> show snap-data-volume
Volume Status Size(MB) Logical Physical Host Used Copy Used Host SDP Copy SDP
No. Name Size(MB) Size(MB) Size(MB) Size(MB) Using Size(MB) Using Size(MB)
100 SDV001 Available 102400 5120 4144 3120 1024 3120 1024
105 SDV002 Available 102400 5120 4144 3120 1024 3120 1024
108 SDV003 Available 102400 5120 4144 3120 1024 3120 1024