Fujitsu Eternus DX80 S2 - Show Firmware-Version

Chapter 5 Information Settings and Display
5.3 Maintenance > show firmware-version
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
635
show firmware-version
This command displays the controller firmware version registered in the system.
■ Syntax
■ Parameter
No parameters.
■ Output
■ Example(s)
show firmware-version
# show firmware-version
# Version Date
# 1 V10L30-0000 2011-12-09 Next
# 2 V10L20-0000
2011-09-01 Current
A B C
A: Controller firmware version
B: Created date
C: Status
Current: The currently running firmware
Next: The reserved controller firmware at the next booting
Others are not displayed.
The following examples display the controller firmware version:
CLI> show firmware-version
Version Date
1 V10L10-0000 2011-06-01
2 V10L20-0000 2011-09-01 Current
CLI> show firmware-version
Version Date
1 V10L30-0000 2011-12-09 Next
2 V10L20-0000 2011-09-01 Current