Fujitsu Eternus DX80 S2 - Canceling Mapping; D.3.1 Canceling Mapping; Deleting Affinity Groups

Appendix D Basic Setting Examples
D.3 Setting Cancellation
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
747
D.3.1 Canceling Mapping
■ Releasing mapping (host affinity)
An example of deleting host affinity is shown below. For more details, refer to "3.5 Host Interface
Management" (page 193).
Procedure
1 Cancel all of the host affinity settings for port group PG0001.
End of procedure
■ Releasing LUN mapping
An example of deleting LUN mapping is shown below. For more details, refer to "3.5 Host Interface
Management" (page 193).
Procedure
1 Cancel all of the mapping definitions for host interface ports 000 and 001.
End of procedure
D.3.2 Deleting Affinity Groups
An example of deleting an affinity group is shown below. For more details, refer to "3.5 Host Interface
Management" (page 193).
Procedure
1 Delete affinity group AG002.
End of procedure
CLI> release host-affinity -port-group-name PG0001
CLI> release mapping -port 000,001
CLI> delete affinity-group -ag-name AG002