ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
731
Appendix C
Firmware Version Support for Commands
This appendix provides a list of firmware versions that support CLI commands. An "x" mark indicates that the
command is supported by this firmware or later.
Table C.1 List of firmware version support for commands
Some parameters of a command may be supported by a firmware version that is different from the firmware
version that supports the command.
Command name Firmware Version
V10L10 V10L16 V10L20 V10L25 V10L30 V10L40 V10L45 V10L46 V10L50
Storage System Status
show status x
show enclosure-status x
show fru-ce x
show fru-de x
show disks x
show hardware-information x
Thin Provisioning Pool Management
set thin-pro-license x
delete thin-pro-license x
show thin-pro-license x
create thin-pro-pool x
set thin-pro-pool x
delete thin-pro-pool x
show thin-pro-pools x
show thin-pro-pool-progress x
expand thin-pro-pool x
format thin-pro-pool x
set eco-thin-pro-pool x
release eco-thin-pro-pool x
show eco-thin-pro-pool x
Flexible Tier Management
show flexible-tier-mode x
delete flexible-tier-pool x
show flexible-tier-pools x
show flexible-tier-pool-progress x
set flexible-tier-sub-pool x
show flexible-tier-sub-pools x
show ftrpe-migration x
start balancing-flexible-tier-pool x
To Next Page
Loading...
