Fujitsu Eternus DX80 S2 - Show Date

Chapter 4 Function/System Settings and Display
4.4 Miscellaneous > show date
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
558
show date
This command displays the date and time of the system.
■ Syntax
■ Parameter
No parameters.
■ Output
■ Example(s)
show date
# 2008-12-31 00:00:03 GMT+03:00 (Nairobi, Moscow)
date time timezone
# DST [ON] 06-01 02:00 - 09-30 02:00
dst : from 2:00 AM on June 1 to 2:00 AM on September 30
# 2008-01-01 23:55:00 GMT+01:00 (Paris, Madrid, Stockholm)
date time timezone dst
DST [ON] 03-last-Sun 02:00 - 10-last-Sun 02:00
dst : from 2:00 AM on March last Saturday
to 2:00 on October last Saturday
The following example displays the system date and time:
CLI> show date
2008-10-01 10:59:59 GMT+09:00 (Tokyo, Osaka, Kyoto, Fukuoka, Sapporo)
DST [OFF]
CLI> show date
2008-12-31 00:00:03 GMT+03:00 (Nairobi, Moscow)
DST [ON] 06-01 02:00 - 09-30 02:00
CLI> show date
2008-01-01 23:55:00 GMT+01:00 (Paris, Madrid, Stockholm)
DST [ON] 03-last-Sun 01:00 - 10-last-Sun 01:00