Fujitsu Eternus DX80 S2 - Show Panic-Dump

Chapter 5 Information Settings and Display
5.3 Maintenance > show panic-dump
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
644
show panic-dump
This command displays a list of the panic dumps that are stored in the system.
■ Syntax
■ Parameter
No parameters.
■ Output
■ Example(s)
show panic-dump
# show panic-dump
No. Module Panic Date Panic Code Data Size Panic Message
1 CM#0 2008-07-10 12:15:10 0x12345678 286331153 EXC:Data Abort
2 CM#1 2008-07-14 12:35:10 0x12345678 286331153 EXC:Data Abort
3
CA#3 2009-01-23 12:34:10 0x12345678 134217728 EXC:Data Abort
A B C D E F
A: Panic dump number
B: Panic dump module name
C: Panic date
D: Panic code
E: Panic dump size (unit: byte)
F: Messages
The following example displays a list of the panic dumps:
CLI> show panic-dump
No. Module Panic Date Panic Code Data Size Panic Message
1 CM#0 2008-07-10 12:15:10 0x12345678 286331153 EXC:Data Abort
2 CM#1 2008-07-14 12:35:10 0x12345678 286331153 EXC:Data Abort
3 CA#3 2009-01-23 12:34:10 0x12345678 134217728 EXC:Data Abort