EasyManua.ls Logo

Fujitsu Eternus DX80 S2 - Delete All-Volumes

Fujitsu Eternus DX80 S2
756 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 3 Configuration Settings and Display
3.4 Volume Management > delete all-volumes
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
152
delete all-volumes
This command deletes all volumes from the specified RAID group and Thin provisioning pool, except for snap
data pool volumes. If the designated RAID group includes an expanded volume source, the expanded
destination is also deleted, if the designated RAID group includes an expanded volume destination, the
command fails with an error message. In this case, try again after deleting the expanded volume from the
source side. The Thin provisioning volume (tpv) cannot be deleted with the "-rg-number" or the "-rg-name"
parameters. For the Thin provisioning volume, the "-pool-number" or the "-pool-name" parameters are used.
The "delete all-flexible-tier-volumes" command is used to delete all of the Flexible Tier Volumes (FTVs) in a
Flexible Tier Pool (FTRP).
Syntax
Parameter
Example(s)
delete all-volumes {-rg-number
rg_number
| -rg-name
rg_name
}
{-pool-number
pool_number
| -pool-name
pool_name
}
-rg-number
or
-rg-name
This parameter specifies the RAID group identifiers to delete all the volumes contained in the
RAID groups. Only one RAID group can be specified at the same time. For details, refer to "1.2.9
Volume Syntax" (page 22).
This parameter cannot be specified with the "-pool-number" or the "-pool-name" parameter.
-pool-number
or
-pool-name
This parameter specifies the Thin provisioning pool identifiers to delete all the volumes
contained in the Thin provisioning pools. Only one Thin provisioning pool can be specified at
the same time. For details, refer to "1.2.5 Thin Provisioning Pool Syntax" (page 20)
.
This parameter cannot be specified with the "-rg-number" or the "-rg-name" parameter.
The following example deletes all the volumes contained in the RAID group named "RGP001":
CLI> delete all-volumes -rg-name RGP001
The following example deletes all the volumes contained in the Thin provisioning pool named "TPP001":
CLI> delete all-volumes -pool-name TPP001

Table of Contents

Other manuals for Fujitsu Eternus DX80 S2

Related product manuals