Fujitsu Eternus DX80 S2 - Volume Management

Chapter 3 Configuration Settings and Display
3.4 Volume Management
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
144
3.4 Volume Management
This chapter explains the commands related to the management of volumes.
For details on the commands relating to volumes (Flexible Tier Volumes (FTVs)) that are assigned to Flexible
Tier Pools (FTRPs), refer to "3.4.2 Flexible Tier Volumes" (page 175)
.
3.4.1 Volume
This section explains the details of the commands that are related to the management of volumes.
• Creating volumes
• Deleting volumes
• Changing existing volume information
• Formatting volumes
• Encrypting volumes
• LUN concatenation (expanding volumes)
• RAID migration (moving volumes)
• Balancing TPVs
• Starting Zero Reclamation
• Stopping Zero Reclamation