Fujitsu Eternus DX80 S2 - Change Sed-Key

Chapter 4 Function/System Settings and Display
4.4 Miscellaneous > change sed-key
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
601
change sed-key
This command updates the key for the key group.
■ Syntax
■ Parameter
■ Example(s)
change sed-key -mode {reuse | delete}
-mode This parameter specifies the update mode.
reuse The previously used key is reusable after being switched.
delete The previously used key is not reusable after being switched.
The following example updates the key for the key group:
CLI> change sed-key -mode reuse