Chapter 4 Function/System Settings and Display
4.4 Miscellaneous > show sed-key-groups
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
600
■ Example(s)
J: FQDN or IP address of the master server. If it is not set, a hyphen (-) is displayed.
K: Slave server ID. If it is not set, a hyphen (-) is displayed.
L: Slave server status
M: FQDN or IP address of the slave server. If it is not set, a hyphen (-) is displayed.
N: Issuer name
O: Owner name
P: Start date of the valid period
Q: End date of the valid period
R: Serial number
When a key group is registered, A to M are displayed.
When a server certificate is registered, N to R are displayed.
The following example displays the key group information and the server certificate information:
CLI> show sed-key-groups
SED Key Group Key Expiration Key Status
Name Date
key_group1 2012-07-27 Normal
<Detail Information>
Machine Group Name machine_group1
Security Level High
Recovery Mode Auto
Period 7
Master Server ID 1 (Normal)
Master Server 10.21.134.198
Slave Server ID 2 (Normal)
Slave Server 10.21.134.199
<Server Certificate Information>
Issuer Name Fujitsu Certification Authority
Subject Name Key Management Server
Valid From 2012-08-17 13:04:47
Valid To 2015-08-17 13:04:47
Serial Number 602199653074063
The following example shows when a key group is registered but a server certificate is not registered:
CLI> show sed-key-groups
SED Key Group Key Expiration Key Status
Name Date
key_group1 2012-07-27 Normal
<Detail Information>
Machine Group Name machine_group1
Security Level High
Recovery Mode Auto
Period 7
Master Server ID 1 (Normal)
Master Server 10.21.134.198
Slave Server ID 2 (Normal)
Slave Server 10.21.134.199
The following example shows when a key group is not registered but a server certificate is registered:
CLI> show sed-key-groups
<Server Certificate Information>
Issuer Name Fujitsu Certification Authority
Subject Name Key Management Server
Valid From 2012-08-17 13:04:47
Valid To 2015-08-17 13:04:47
Serial Number 602199653074063