Fujitsu Eternus DX80 S2 - Delete Host-Sas-Address

To Next Page

To Previous Page

Chapter 3 Configuration Settings and Display

3.5 Host Interface Management > delete host-sas-address

ETERNUS CLI User’s Guide

237

delete host-sas-address

This command deletes existing SAS host identifier(s).

■ Syntax

■ Parameter

■ Example(s)

delete host-sas-address {-host-number

host_numbers

| -host-name

host_names

}

-host-number

-host-name

This parameter specifies which SAS host identifiers are to be deleted. One or more identifiers

can be specified at the same time. For details, refer to "1.2.10 Host Syntax" (page 23)

The following example deletes the SAS hosts with consecutively numbered identifiers #1 – #3:

CLI> delete host-sas-address -host-number 1-3

The following example only deletes the host named "HBA2":

CLI> delete host-sas-address -host-name HBA2

Other manuals for Fujitsu Eternus DX80 S2