Chapter 3 Configuration Settings and Display
3.4 Volume Management > show balancing-thin-pro-volumes
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
171
show balancing-thin-pro-volumes
This command displays information such as the status and progress of TPV balancing. The information of only
TPVs that are being balanced is displayed.
■ Syntax
■ Parameter
■ Output
show balancing-thin-pro-volumes [-volume-number
volume_number
| -volume-name
volume_name
]
-volume-number
or
-volume-name
Optional. This parameter specifies the number of volumes that is to be displayed (filtering).
Only one number can be specified. For details, refer to "1.2.9 Volume Syntax" (page 22)
.
Example: -volume-number 1
An error occurs when a volume other than a TPV is specified.
# Volume Balancing Balancing Process Work Volume Error Elapsed
# No. Name Level Status Progress(%) No. code Time
# 0 TPV00 High Active 99 1023 0x00 02h34min50sec
# 1 TPV01 Medium Active 50 2047 0x00 01h23min45sec
# 2
TPV02 Low Error 30 4095 0x73 00h30min30sec
A B C D E F G H
# <RAID Group List>
# RAID Group Used
# No.
Name Capacity(MB)
I J K
A: Volume number
B: Volume name
C: Balancing level
D: Balancing process status
E: Balancing process progress
F: Working volume number
G: Error code
H: Elapsed time
I: RAID Group Number (Only when specifying Volume)
J: RAID Group Name (Only when specifying Volume)
K: Used Capacity(Unit : MB) (Only when specifying Volume)
To Next Page
Loading...
