Fujitsu Eternus DX80 S2 - Page 172

Chapter 3 Configuration Settings and Display
3.4 Volume Management > show balancing-thin-pro-volumes
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
172
■ Example(s)
The following example displays a list of all migrating volumes:
CLI> show balancing-thin-pro-volumes
Volume Balancing Balancing Process Work Volume Error Elapsed
No. Name Level Status Progress(%) No. code Time
0 TPV00 High Active 99 1023 0x00 02h34min50sec
1 TPV01 Medium Active 50 2047 0x00 01h23min45sec
2 TPV02 Low Error 30 4095 0x73 00h30min30sec
The following example displays the specified volume:
CLI> show balancing-thin-pro-volumes -volume-number 1
Volume Balancing Balancing Process Work Volume Error Elapsed
No. Name Level Status Progress(%) No. code Time
1 TPV01 Medium Active 50 2047 0x00 01h23min45sec
<RAID Group List>
RAID Group Used
No. Name Capacity(MB)
1 RAIDGROUP001 1344
2 RAIDGROUP002 2688