Fujitsu Eternus DX80 S2 - Set Date

Chapter 4 Function/System Settings and Display
4.4 Miscellaneous > set date
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
555
set date
This command sets the date and time of the system.
■ Syntax
■ Parameter
set date [-time YYYYMMDDhhmmss ] [-timezone number ] [-dst {enable|disable}]
[-from{
MMDDhh | MM ,{1st|2nd|3rd|4th|last},{sun|mon|tue|wed|thu|fri|sat}, hh }]
[-to {
MMDDhh | MM ,{1st|2nd|3rd|4th|last},{sun|mon|tue|wed|thu|fri|sat}, hh }]
-time Optional. This parameter specifies the date and time. The format is "YYYYMMDDhhmmss":
"YYYY" is the year (a four-digit number), "MM" is the number of the month (01-12), "DD" is the
number of the day (01-31), "hh" is the hour in 24-hour time (00-23), "mm" is the minute (00-
59), and "ss" is the second (00-59). If omitted, the existing setting is not changed.
-timezone Optional. This parameter specifies the time difference from Greenwich Mean Time (GMT) . The
selectable preset numbers are shown below. If omitted, the existing setting is not changed.
0
Eniwetok, Kwajalein
-12:00
1
Samoa
-11:00
2
Honolulu
-10:00
3
Alaska
-9:00
4
Los Angels, San Francisco, San Diego
-8:00
5
Arizona
-7:00
6
Chicago, Mexico City
-6:00
7
New York, Bogota
-5:00
8
Caracas
-4:00
9
Newfoundland
-3:30
10
Sao Paulo, Brasilia
-3:00
11
Mid-Atlantic Ocean
-2:00
12
Azores Island, Cape Verde
-1:00
13
Dublin, London, Manchester, Lisbon
0:00
14
Paris, Madrid, Stockholm
+1:00
15
Rome, Vienna, Berlin
+1:00
16
Milan, Amsterdam
+1:00
17
Athens, Helsinki, Cairo
+2:00
18
Beirut, Cape Town
+2:00
19
Nairobi, Moscow
+3:00
20
Abu Dhabi
+4:00
21
Islamabad, Karachi
+5:00
22
New Delhi
+5:30
23
Dhaka
+6:00