Fujitsu Eternus DX80 S2 - RADIUS Server Settings

Chapter 4 Function/System Settings and Display
4.1 User Management
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
372
4.1.2 RADIUS Server Settings
RADIUS (Remote Authentication Dial In User) is the networking protocol for the centralized management of
the authentication, authorization and accounts of network users.
This section explains the commands to set authentication, authorize and account by the server.
• This command sets up the RADIUS authentication server.
• Display settings of the system and the RADIUS authentication server(s).
RADIUS
authentication
server (Secondary)
Secondary is optional.
RADIUS
authentication
server (Primary)
Set up the RADIUS
authentication server(s).
Check settings of the
RADIUS server(s).
ETERNUS DX
Disk storage system
User