Fujitsu Eternus DX80 S2 - Page 154

Chapter 3 Configuration Settings and Display
3.4 Volume Management > show volumes
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
154
-ftrp-number
or
-ftrp-name
Optional. This parameter specifies the Flexible Tier Pool (FTRP) identifier. The details of the
volumes on a FTRP will be displayed. If omitted, a summary of all the volumes that exist in the
system is displayed. For details, refer to "1.2.6 Flexible Tier Pool Syntax" (page 21)
.
• Only one parameter can be specified.
• Other parameters (except for "-mode default" and "-mode ftv") cannot be specified at the
same time.
-type Optional. This parameter specifies the volume type to display the specific type. If the volume
type is omitted, it is handled as selecting all types.
• Only one parameter can be specified.
• Other parameters (except for "-mode default") cannot be specified at the same time.
standard A normal/open volume (Standard)
sdv A Snap Data Volume (SDV) for Advanced Copy functions
sdpv A Snap Data Pool Volume (SDPV) for Advanced Copy functions
tpv A Thin Provisioning Volume (TPV)
ftv A Flexible Tier Volume (FTV)
wsv A Wide Striping Volume (WSV)