Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > set affinity-group
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
255
■ Example(s)
The following example changes the affinity group named "AGP001". The new name is "NEW_AGP002":
CLI> set affinity-group -ag-name AGP001 -name NEW_AGP002
In the following example, the first command creates an affinity group that is named "AGP001". This affinity
group will contain a definition of the association of consecutive volumes #0 – #10 and consecutive LUNs #0
– #10. The second command will add other definitions to the affinity group (existing definitions will not
change). Consecutive volumes #101 – #105 will be associated with LUNs #11 – #15:
CLI> create affinity-group -name AGP001 -volume-number 0-10 -lun 0-10
CLI> set affinity-group -ag-name AGP001 -volume-number 101-105 -lun 11-15
To Next Page
Loading...
