Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > show host-lu-qos
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
339
■ Output
When the Host-LU QoS settings are displayed
# Port (Bandwidth Limit) Host (Bandwidth Limit) LU QoS
# No. Name Group
# CM#0 CA#0 Port#0 ( 0) 0 Host#FC_0 ( 0) -
# CM#0 CA#0 Port#0
( 0) 2 Host#FC_1 ( 1) 2
A B C D E F
A: Host interface port
B: Performance limit value for the host interface port
C: Host number
D: Host name
E: Performance limit value for the host
F: LU QoS Group number that is set for the LU QoS
When the Host-LU QoS settings are displayed with the target port, the target host, and the target LU QoS
group specified
# Port (Bandwidth Limit) Host (Bandwidth Limit) LU QoS
# No. Name Group
# CM#0 CA#0 Port#0 ( 0) 2 Host#FC_1 ( 1) 2
A B C D E F
# <Event>
# No. Port Host Schedule No. LU QoS
# Schedule No. Bandwidth Limit Schedule No. Bandwidth Limit Group
# 1 10 5 1 3 15 3
# 2 20 8 3 5 25 4
# 3
30 10 5 7 35 5
G H I J K L M
A: Host interface port
B: Performance limit value for the host interface port
C: Host number
D: Host name
E: Performance limit value for the host
F: LU QoS Group number that is set for the LU QoS
G: Event number of the QoS schedule
H: QoS schedule number for the host interface port
I: Performance limit value of the QoS schedule for the host interface port
J: QoS schedule number for the host
K: Performance limit value of the QoS schedule for the host
L: QoS schedule number for the LU QoS
M: Performance limit value of the QoS schedule for the LU QoS
When the Port QoS settings are displayed
# Port Bandwidth Limit
# CM#0 CA#0 Port#0 0
# CM#0 CA#1 Port#0 2
A B
A: Host interface port
B: Performance limit value for the host interface port
To Next Page
Loading...
