Fujitsu Eternus DX80 S2 - Page 497

Chapter 4 Function/System Settings and Display
4.3 Network Management > show community-profile
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
497
The following example displays the SNMP community profiles that is named community2:
CLI> show community-profile -community community2
No. Name Manager No. MIB View
2 "community2" 2, 6, "view3"
<Manager list>
No. IP address
2: 17.20.56.101
6: 144.72.48.100
The following example displays an SNMP community profile named community5 with 1, 2 and 3 registered
for the manager number that is only used to TRAP:
CLI> show community-profile -community community5
No. Name Manager No. MIB View
5 "community5" 1, 2, 3
<Manager list>
No. IP address
1: 192.168.0.10
2: 17.20.56.101
3: 10.0.0.1
The following example displays an SNMP community profile name community6 with unlimited access for all
managers:
CLI> show community-profile -community community6
No. Name Manager No. MIB View
6 "community6" "xview6"
<Manager list>
No. IP address