Chapter 2 Status Display
2.1 Storage System Status > show fru-ce
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
61
For FCLINK, OCLINK, and RFCF-RA information, the following information is displayed:
CM#0 Port#0 Information
Port Type [FCLINK]
Status/Status Code [Normal / 0xE001]
CM#0 Port#1 Information
Port Type [OCLINK]
Status/Status Code [Normal / 0xE001]
CM#1 Port#0 Information
Port Type [FC]
Port Mode [RFCF-RA]
Status/Status Code [Normal / 0xE001]
For SCU Information, the following information is displayed:
SCU Information
SCU#0 Status/Status Code [Normal / 0xE001]
SCU#0 Voltage [9.40V]
SCU#0 Expires [0-00]
SCU#0 Parts Number []
SCU#0 Serial Number []
SCU#0 Hard Revision []
SCU#1 Status/Status Code [Normal / 0xE001]
SCU#1 Voltage [9.40V]
SCU#1 Expires [0-00]
SCU#1 Parts Number []
SCU#1 Serial Number []
SCU#1 Hard Revision []
The following example displays the status of PSU#0:
CLI> show fru-ce -type psu0
CE PSU#0 Information
Status/Status Code [Normal / 0xE001]
To Next Page
Loading...
