Appendix B List of Supported Commands
B.1 List of Supported Commands
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
705
show balancing-thin-pro-volumesxxxxx
start zero-reclamation x x x x
stop zero-reclamation x x x x
create flexible-tier-volume x x x x
set flexible-tier-volume x x x x
format flexible-tier-volume x x x x
expand flexible-tier-volume x x x x
delete flexible-tier-volume x x x x
delete all-flexible-tier-volumes x x x x
start flexible-tier-migration x x x x
set odx-mode xxxx
show odx-mode xxxxx
create odx-buffer-volume x x x x
set odx-buffer-volume xxxx
delete odx-buffer-volume x x x x
Host Interface Management
set fc-parameters x
show fc-parameters x x
set sas-parameters x
show sas-parameters x x
set iscsi-parameters x
show iscsi-parameters x x
set fcoe-parameters x
show fcoe-parameters x x
create host-wwn-name x x
set host-wwn-name x x
delete host-wwn-name x x
show host-wwn-names x x x
discover host-wwn-names x x
create host-sas-address x
set host-sas-address x
delete host-sas-address x
show host-sas-addresses x x
discover host-sas-addresses x
create host-iscsi-name x
set host-iscsi-name x
delete host-iscsi-name x
show host-iscsi-names x x
discover host-iscsi-names x
create affinity-group xxxx
Command name Host interface Slave
control
(*1)
Remarks
FC FCoE SAS iSCSI
To Next Page
Loading...
