Appendix B List of Supported Commands
B.1 List of Supported Commands
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
711
*1: This command is available when the user logs in from the slave CM.
*2: Encryption-related functions are included in the command itself or as part of the command.
*3: Not available for the ETERNUS DX80 S2
clear disk-error xxxx
show port-error xxxx
show bad-data-info x x x x
Utility
show diagnosis x x x x
set led xxxx
show led xxxx
set event-parameters x x x x
show event-parameters xxxxx
set subsystem-parameters x x x x
show subsystem-parametersxxxxx
release reservation x x x x
show reservation x x x x
show pinned-data xxxx
CLI Environment
set clienv-force-unlock x x x x
set clienv-idle-timeout xxxx
logoff/logout/exit xxxxx
help xxxxx
Command name Host interface Slave
control
(*1)
Remarks
FC FCoE SAS iSCSI
To Next Page
Loading...
