Appendix B List of Supported Commands
B.3 List of Supported Commands (Default Roles)
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
724
start flexible-tier-migration x x x x x
set odx-mode x x
show odx-mode x x
create odx-buffer-volume x x x
set odx-buffer-volume x x x
delete odx-buffer-volume x x x
Host Interface Management
set fc-parameters x x x
show fc-parameters x x x x x
set sas-parameters x x x
show sas-parameters x x x x x
set iscsi-parameters x x x
show iscsi-parameters x x x x x
set fcoe-parameters x x x
show fcoe-parameters x x x x x
create host-wwn-name x x x
set host-wwn-name x x x
delete host-wwn-name x x x
show host-wwn-names x x x x x
discover host-wwn-names x x x
create host-sas-address x x x
set host-sas-address x x x
delete host-sas-address x x x
show host-sas-addresses x x x x x
discover host-sas-addresses x x x
create host-iscsi-name x x x
set host-iscsi-name x x x
delete host-iscsi-name x x x
show host-iscsi-names x x x x x
discover host-iscsi-names x x x
create affinity-group x x x
set affinity-group x x x
copy affinity-group x x x
delete affinity-group x x x
show affinity-groups x x x
create lun-group x x x
set lun-group x x x
copy lun-group x x x
delete lun-group x x x
show lun-groups x x x
Command name Default Role
Monitor Admin
Storage
Admin
Account
Admin
Security
Admin
Maintainer
To Next Page
Loading...
