TX120 S3 Upgrade and Maintenance Manual 111
6 Power supply
This chapter provides information on how to handle a standard power supply
unit (PSU).
About power supply configurations
The PRIMERGY TX120 S3 server is equipped with a standard PSU.
V CAUTION!
The server supports a mains voltage in the range of 100 V - 240 V. You
may only operate the server if its rated voltage range corresponds to the
local mains voltage.
Safety notes
V CAUTION!
● Do not disassemble the PSU. Doing so may cause electric shock.
● Areas around the PSU may remain extremely hot after shutdown.
After shutting down the server, wait for hot components to cool down
before removing PSUs.
● The PSU is heavy, so handle it carefully. If you drop it by mistake,
injuries may result.
● For further safety information, please refer to chapter "Important
information" on page 37.
To Next Page
Loading...
Need help?
General