118 Upgrade and Maintenance Manual TX120 S3
Power supply
6.1.1.7 Concluding steps
Perform the following procedures to complete the task:
Ê Close the server cover as described in section "Closing the server" on
page 70.
Ê Reconnect the AC power cord to the PSU.
Ê "Performing a fan test after replacing a defective fan" on page 108
Ê If BitLocker functionality is used and has been disabled before starting the
maintenance task, re-enable BitLocker as described in section "Enabling
BitLocker functionality" on page 103.
To Next Page
Loading...
