Fujitsu PRIMERGY TX120 S3 Upgrade And Maintenance Manual

70 Upgrade and Maintenance Manual TX120 S3
Basic hardware procedures
4.6 Closing the server
V CAUTION!
● Before attaching the covers, make sure no unnecessary parts or tools
are left inside the server.
● In order to comply with applicable EMC regulations (regulations on
electromagnetic compatibility) and satisfy cooling requirements, the
PRIMERGY TX120 S3 server must not run while the side cover is
removed.
● For further safety information, please refer to chapter "Important
information" on page 37.
4.6.1 Mounting the hard disk drive cover
Figure 20: Installing the hard disk drive cover
Ê Insert the hard disk drive cover with the lower side into the side / top
cover (1).
Ê Close the hard disk drive cover (2).
/
0

Fujitsu PRIMERGY TX120 S3 Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX120 S3
Category	Server
Language	English