TX120 S3 Upgrade and Maintenance Manual 293
13 Front panel and LAN connector
This chapter provides information on how to replace the front panel module and
optional front LAN connector board.
Safety notes
V CAUTION!
● When inserting the front panel module into the server, ensure not to
pinch or strain any connected cables.
● Circuit boards and soldered parts of internal options are exposed and
can be damaged by static electricity. Always discharge static build-up
(e.g. by touching a grounded object) before handling electrostatic-
sensitive devices (ESDs)
● Do not touch the circuitry on boards or soldered parts. Hold circuit
boards by their metallic areas or edges.
● For further information, please refer to chapter "Important
information" on page 37.
In this chapter
● "Replacing the front panel module" on page 294
● "Installing the front LAN connector" on page 300
● "Removing the front LAN connector" on page 307
● "Replacing the front LAN connector and board" on page 311
To Next Page
Loading...
Need help?
General