Fujitsu PRIMERGY TX120 S3 Upgrade And Maintenance Manual

TX120 S3 Upgrade and Maintenance Manual 181
Expansion cards and backup units
9.2.2.3 Removing an expansion card
Figure 82: Removing an expansion card
Ê Fold up the locking handle on the slot bracket clamp.
Ê If applicable, remove SFP+ transceiver modules from the expansion card,
as described in section "Replacing SFP+ transceiver modules" on page 232.
Ê Carefully remove the expansion card from its slot.

Fujitsu PRIMERGY TX120 S3 Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX120 S3
Category	Server
Language	English