Fujitsu PRIMERGY TX120 S3 - Replacing the Backup Drive USB Cable; Required Tools; Preliminary Steps

404 Upgrade and Maintenance Manual TX120 S3
Cables
15.7 Replacing the backup drive USB cable
Figure 262: Backup drive USB cable T26139-Y3973-V2
15.7.1 Required tools
● Preliminary and concluding steps: tool-less
● Replacing the backup drive USB cable: tool-less
15.7.2 Preliminary steps
Before replacing the power cable, perform the following steps:
Ê Locate the defective server as described in section "Locating the defective
server" on page 50.
Ê Shut down the server as described in section "Shutting down the server" on
page 58.
Field Replaceable Units (FRU)
Average task duration: 10 minutes