TX120 S3 Upgrade and Maintenance Manual 85
Basic software procedures
I For further information, refer to section "Locating the defective server" on
page 50 or to the "ServerView Suite Local Service Concept (LSC)"
manual.
Using the ID button on the front panel
Ê Press the ID button on the front panel to switch on the system identification
LEDs.
I For further information, refer to section "Front panel controls and
indicators" on page 436.
Using ServerView Operations Manager
Ê In ServerView Operations Manager Single System View and press the Locate
button in the title bar to switch on the ID indicators.
To Next Page
Loading...
Need help?
General