Fujitsu PRIMERGY TX2540 M1 Upgrade And Maintenance Manual

TX2540 M1 Upgrade and Maintenance Manual 125
Power supply units
6.3.2.3 Installing a PSU dummy cover
Figure 50: Installing a PSU dummy cover
Ê Insert the PSU dummy cover into the empty PSU bay with the impressed
arrow symbol facing to the left (see circle).
Ê Push the PSU dummy cover into its bay until it locks in place.
V CAUTION!
Always install dummy covers into unused PSU bays to comply with
applicable EMC regulations and satisfy cooling requirements.

Fujitsu PRIMERGY TX2540 M1 Specifications

General

Processor socket	-
Intel Xeon series	E5-2400
Built-in processor	No
Motherboard chipset	Intel® C602
Number of processors supported	2
Number of DIMM slots	12
Supported memory types	DDR3-SDRAM
Maximum internal memory	192 GB
RAID levels	0, 1, 10
Hot-swap HDD bays	Yes
Storage drive sizes supported	3.5 \
Number of storage drives supported	4
Supported storage drive interfaces	Serial ATA, Serial Attached SCSI (SAS)
LAN controller	Intel I210
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
USB 2.0 ports quantity	6
Chassis type	Tower
Product color	Black