Figure 86: Securing the 16x 2.5-inch HDD front panel
Ê Firmly press down on the HDD front panel until its upper edge is flush with
the chassis (see arrow).
Ê Secure the HDD front panel to the server front with four screws (see circles).
7.2.9.5 Concluding steps
Ê "Installing the system fan holder" on page 75
Ê "Reassembling" on page 62
Ê Install HDD / SSD modules or HDD dummy modules into the additional HDD
slots as described in sections "Installing a 2.5-inch HDD / SSD module" on
page 147 and "Installing a 2.5-inch HDD / SSD dummy module" on
page 151.
I For detailed information on HDD mounting order, refer to section "2.5-
inch HDD / SSD configurations" on page 139.
Ê "Connecting the server to the mains" on page 72
Ê "Switching on the server" on page 73
Ê "Enabling BitLocker functionality" on page 101
To Next Page
Loading...
