Fujitsu PRIMERGY TX2540 M1

TX2540 M1 Upgrade and Maintenance Manual 267
Main memory
10.2 Installing memory modules
10.2.1 Preliminary steps
Ê "Disabling or suspending BitLocker functionality" on page 77
Ê "Disabling SVOM boot watchdog functionality" on page 78
Ê "Shutting down the server" on page 48
Ê "Disconnecting the server from the mains" on page 48
Ê "Getting access to the component" on page 49
10.2.2 Installing a memory module
Ê Identify the correct memory slot see section "Basic information" on
page 264.
Figure 184: Installing memory modules (A)
Ê Press out the securing clip at each end of the memory slot.
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: tool-less