EasyManuals Logo

Fujitsu PRIMERGY TX2540 M1 Upgrade And Maintenance Manual

Fujitsu PRIMERGY TX2540 M1
422 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #90 background imageLoading...
Page #90 background image
90 Upgrade and Maintenance Manual
TX2540 M1
Basic software procedures
I The expansion card’s option ROM can now be disabled in the system
board BIOS.
Exception: If the expansion card controls a permanent boot device, the
card’s Option ROM has to remain enabled.
5.2.5 Verifying and configuring the backup software
solution
I This task only applies to the Japanese market.
Disabling backup drives
Depending on the backup software solution, it may be necessary to disable or
delete the backup drive from the backup software drive list and reconfigure
backup jobs after completing the maintenance task.
This is the case for the following backup software solutions:
– Netvault for Windows
–ARCServe
– BackupExec
I Procedures may differ depending on the backup software. For details,
refer to the dedicated documentation provided separately.
Further information on suitable backup software solutions and related
documentation is available to Fujitsu service partners from the Fujitsu
Extranet pages.
Re-enabling backup drives
If a backup drive has been disabled or deleted from the backup software drive
list as described in section 5.1.4 on page 81, it has to be re-enabled to complete
the maintenance task.
Ê Re-enable backup drives and revise backup software settings and cronjobs.
I Detailed information on suitable backup software solutions and
related documentation is available to Fujitsu service partners from the
Fujitsu Extranet pages

Table of Contents

Other manuals for Fujitsu PRIMERGY TX2540 M1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu PRIMERGY TX2540 M1 and is the answer not in the manual?

Fujitsu PRIMERGY TX2540 M1 Specifications

General IconGeneral
Processor socket-
Intel Xeon seriesE5-2400
Built-in processorNo
Motherboard chipsetIntelĀ® C602
Number of processors supported2
Number of DIMM slots12
Supported memory typesDDR3-SDRAM
Maximum internal memory192 GB
RAID levels0, 1, 10
Hot-swap HDD baysYes
Storage drive sizes supported3.5 \
Number of storage drives supported4
Supported storage drive interfacesSerial ATA, Serial Attached SCSI (SAS)
LAN controllerIntel I210
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet interface typeGigabit Ethernet
USB 2.0 ports quantity6
Chassis typeTower
Product colorBlack

Related product manuals