Figure 303: Cabling 3.5-inch HDDs and 4x 3.5-inch HDD extension box
16.3 Replacing the intrusion switch cable
16.3.1 Preliminary steps
Ê "Locating the defective server" on page 45
Ê "Shutting down the server" on page 48
Ê "Disconnecting the server from the mains" on page 48
Ê "Getting access to the component" on page 49
Ê "Removing the system fan holder" on page 74
Field Replaceable Unit
(FRU)
Hardware: 10 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver
MoBo
PSU
Access. Slot
MLC1
Op. Panel
Access. Slot
To Next Page
Loading...
